Custom gates & metal fencing in Sydney
Sliding, swing and pedestrian gates, with matching aluminium or steel fencing. Drawn up in CAD, built in our workshop and installed at your place.


Driveway gates
Driveway gates built to fit your opening
No two driveways are the same. Slope, width, the room you have beside the opening and where the power is all change what kind of gate will work. We measure on site, then draw your gate up in CAD so you can see the design, the sizes and the finish before anything is cut.
Sliding gates suit most Sydney driveways because they don't need room to swing. Swing gates work well where there's no space beside the opening for a sliding gate to run back. Either can be manual or fitted with a gate motor.

Front & side fences
Front fences and side fences to match
Most of our gate jobs include fencing, so the gate, the pedestrian entry and the fence panels all line up and finish in the same colour. We build slat, blade, louvre, picket and decorative designs in aluminium or steel, and we can set panels between existing brick or rendered piers.
What we make
Get a free quote- Sliding driveway gates
- Swing gates, single and double
- Pedestrian and side gates
- Gate motors and automation
- Slat, blade and louvre fencing
- Decorative and laser-cut gate designs
- Fence panels between existing piers
- Repairs and replacement gates
Materials & finishes
Built from the right metal
Aluminium is our go-to for most gates and fences: it's light, it won't rust and it's easy on gate motors. Steel is the pick for heavy or decorative gates and for security fencing. Everything is powder coated in your choice of colour.
Good to know
- 01
Front fences above a certain height, or on corner blocks, may need council approval. We'll tell you if yours is likely to, before you commit.
- 02
If the fence is also a pool barrier, it has to meet the pool safety rules as well. See our pool fencing page.
- 03
For a motorised gate we need to know where the nearest power point is, so the motor can be wired by a licensed electrician.
Our work
Gates & Fencing we've built

Timber-look aluminium double driveway gates over a paved driveway 
Charcoal vertical slat sliding gate across a driveway 
Timber-look aluminium driveway and pedestrian gates on a new home 
Black slat front fence on a modern townhouse 
Charcoal vertical slat pedestrian gate between rendered piers 
Timber-look aluminium entry gate with black steel frame 
White aluminium picket pedestrian gate in a brick front fence 
Dark grey vertical slat side gate between two walls 
White picket front fence and gate at dusk 
Timber-look aluminium sliding gate with gate motor 
Grey aluminium slat fence and gate around a backyard sports court 
White aluminium side fence along a lit garden path
See all 30 Gates & fencing photos
Video
Watch it work
Short clips straight from the job.
White aluminium sliding gate closing Charcoal slat gate and fence Decorative steel fence and gate Black steel picket fence
How it works
- 01Send us photos or plansPhone photos are fine. Builders can send PDF, DWG or DXF files.
- 02We measure & designWe measure on site, then send you a CAD drawing and a fixed written quote.
- 03Built in our workshopCut, welded and finished to the drawing you approved.
- 04Installed at your placeFitted, tested and cleaned up, anywhere in Sydney.
Gates & Fencing: common questions
How much does a custom driveway gate cost?
It depends on the width of the opening, the material, the design and whether you want a motor. Send us photos and a rough width and we'll give you a ballpark. After we measure on site, you get a fixed written quote.
Sliding or swing gate: which is better?
A sliding gate is usually better for Sydney driveways because it doesn't swing into the driveway or the street. You need clear space beside the opening for it to slide back into. If you don't have that space, a swing gate is the answer.
Can you add a motor to my existing gate?
Often, yes, as long as the gate is straight, runs freely and is strong enough to take a motor. We'll check it when we visit. If it isn't suitable, we'll tell you straight.
Aluminium or steel for a gate?
Aluminium for most homes: it's lighter, won't rust and is easier on gate motors. Steel for heavy-duty, security or highly decorative gates.
How long does a gate and fence job take?
Once you approve the drawing, most residential gate and fence jobs are built and installed within a few weeks. We'll give you a date when we quote.
Related services
See all services
Pool Fencing
Frameless glass, aluminium and steel pool fences, built to meet NSW pool safety rules.
Pool fencing
Screens & Facades
Slat, louvre, blade and laser-cut privacy screens, plus architectural facade panels.
Screens & facades
Custom Metal Fabrication
Enclosures, shopfit metalwork, brackets and one-off pieces. MIG and TIG welding.
Custom fabricationWhere we build Gates & fencing
Anywhere in Greater Sydney. Areas where we do a lot of this work:
Get a quote for Gates & fencing
Tell us what you need and where you are. Photos help us price it faster. Quotes are free.
- Youssef · 0452 360 360
- [email protected]
- Mon–Fri 7am–5pm · We come to you, Sydney-wide
What happens next
- 1We call you to talk through the job
- 2We measure on site and send a CAD drawing
- 3You get a fixed written quote, no obligation



