Pool fencing in Sydney
Frameless glass, aluminium and steel pool fences, built to meet the NSW pool safety rules and designed to suit your backyard.


Built to pass inspection
A pool fence that passes, and looks good
A pool fence has one job it can't get wrong: keeping small children out. In NSW, pool barriers have to meet the Australian Standard for pool safety (AS 1926.1), and your council or a private certifier can inspect them. We design every pool fence to those rules from the start, so it passes the first time.
Within those rules there's plenty of room for a fence that suits your yard. Frameless glass keeps the view open. Aluminium slat or blade fencing gives more privacy and costs less. Steel suits heavier-duty or decorative work.

New & existing pools
New pools and existing pools
We work with pool builders and landscapers on new pools, and we replace old or non-compliant fences on existing ones. If you're selling or leasing and need a compliance certificate, we can fix whatever the inspector flagged.
What we make
Get a free quote- Frameless glass pool fencing
- Semi-frameless glass
- Aluminium slat and blade pool fencing
- Steel pool fencing
- Self-closing, self-latching pool gates
- Replacing non-compliant pool fences
Materials & finishes
Built from the right metal
Frameless glass uses toughened safety glass on stainless steel or powder-coated spigots. Aluminium pool fencing is powder coated and won't rust, which matters around chlorinated and salt water.
Good to know
- 01
Under the standard, a pool fence is generally at least 1.2 metres high, with gaps under the fence and between bars no bigger than 100 mm.
- 02
Pool gates must self-close and self-latch from any open position, and must open outwards, away from the pool.
- 03
There has to be a clear zone so children can't climb the fence using nearby objects. Pot plants, BBQs, retaining walls and trees all count.
- 04
In NSW your pool must be listed on the NSW Swimming Pool Register, and you need a compliance certificate to sell or lease the property.
How it works
- 01Send us photos or plansPhone photos are fine. Builders can send PDF, DWG or DXF files.
- 02We measure & designWe measure on site, then send you a CAD drawing and a fixed written quote.
- 03Built in our workshopCut, welded and finished to the drawing you approved.
- 04Installed at your placeFitted, tested and cleaned up, anywhere in Sydney.
Pool Fencing: common questions
How high does a pool fence need to be in NSW?
Generally at least 1.2 metres, measured from the ground on the outside of the fence. The gap at the bottom and the gaps between bars can be no more than 100 mm. We build to these rules on every job.
Is frameless glass pool fencing safe?
Yes. It uses thick toughened safety glass, and it's one of the most popular pool barriers in Sydney. Because there are no horizontal rails, it's also hard to climb.
Can you fix a pool fence that failed inspection?
Yes. Send us the inspector's report or a list of the problems, plus photos. Common fixes include gate latches, gate closers, gaps under the fence and climbable objects too close to it.
Glass or aluminium pool fence: which is cheaper?
Aluminium is usually cheaper than frameless glass. Glass costs more but keeps the view of the pool open. We're happy to quote both so you can compare.
Do you work with pool builders?
Yes. We can work from the pool builder's plans and fit our install around their schedule.
Related services
See all services
Gates & Fencing
Sliding, swing and pedestrian gates, manual or motorised. Aluminium and steel fencing to match.
Gates & fencing
Balustrades & Handrails
Glass, aluminium and steel balustrades for balconies and stairs. Handrails inside and out.
Balustrades & handrails
Custom Metal Fabrication
Enclosures, shopfit metalwork, brackets and one-off pieces. MIG and TIG welding.
Custom fabricationWhere we build Pool fencing
Anywhere in Greater Sydney. Areas where we do a lot of this work:
Get a quote for Pool fencing
Tell us what you need and where you are. Photos help us price it faster. Quotes are free.
- Youssef · 0452 360 360
- [email protected]
- Mon–Fri 7am–5pm · We come to you, Sydney-wide
What happens next
- 1We call you to talk through the job
- 2We measure on site and send a CAD drawing
- 3You get a fixed written quote, no obligation







